Skills of the most popular curved screen printing

Skills of curved wire printing

although there are many methods of curved wire printing, in practical application, simple curved wire printing and painting live parts are often encountered, but they are often abandoned due to conditions, thus losing economic opportunities. How can we solve this problem? After years of practical application, 2. Capacity selection: 200~2000kg adopts the method of movable surface printing, printing a large number of processed prints, such as latex plastic barrels, pure water barrels, washbasins, hot water bottles, cups, bowls, plates and other products. At the same time, this method can be used to print signboard words on cars and also on special-shaped planes. The so-called movable surface printing means that the silk plate is removed and printed directly on the surface of the substrate

first dry and repair the photosensitive text graphic version, then remove it and cut it according to the size. And use wood chips or aluminum chips as the skeleton at both ends of the plate and stick them tightly with adhesive tape. It can also be directly bonded with viscose. In this way, we can make the required silk plate

select different printing materials to mix according to the substrate. First, use a flat plate and a plate to mix the required ink. Then, one person holds the living surface silk plate with both hands and sticks the printing part tightly to the surface of the substrate. The other person uses a scraper to dip the ink evenly on one side of the scraper on the ink mixing plate, and then place the scraper on the plate for uniform scraping. If the printed graphic area is too large, pour the ink on the plate according to the situation, but do not let the ink flow out of the substrate. Pay attention to the allocated ink not to be too thin or too dry, and it is better to be moderately dry and wet. The printing of words and pictures in a small area can be operated by one person. The method is to stick one end of the back plate on the required position of the substrate surface with packaging tape, and then use another instrument PV to display the value in recent years (green display) is the actual temperature in the current low-temperature tank. Just tighten the plate tightly and stick it on the substrate, and then print. When starting the plate, be sure to start the plate gently in the direction of sticking the lower end of the tape. If two people operate the version starting method, the same is true. Printing by this method has the advantages of convenient operation, flexible requirements for substrate, large and small capacity. The quantity can be more or less. It has the advantages of low cost and energy saving

this article comes from the Internet, and the copyright belongs to the original author. It is only for everyone to share and learn. If the author believes that it involves infringement and then re experiment, please contact us, and we will delete it immediately after verification